Why Candle Won’t Stay Lit? Find Out Here!

Have you ever noticed that the candle you’ve bought doesn’t actually light when you start to light it? 

A candle doesn’t just flicker and go out; it needs fuel. So, what happens when the wick gets too low and the candle burns down low? You may find that your candle extinguishes itself until it can find more flame.

Nobody wishes their candles to go up in flames, but it can happen to the best of us. Blame it on wind, too much wax, or a lack of air, your candle may soon be a smoky memory. 

No, your candle won’t burn forever. It’s true that they’re not very economical, and those who use them are likely to be the same people who want to buy a new one every year or so.

As long as you keep your candles properly trimmed and burn them regularly every time you use them, they should last you quite a while unless you decide to leave them unattended.

There’s a lot of factor that can affect candles. As for why, we’ll help you understand the many factors that can cause your candle to go out, or even how you can prevent it.

Reason why candle won’t stay lit

No matter you are using a wax or paraffin wax candle, the melted wax will always remain on the wick, and will make the wax go out.

Most of the time, the wax will make it to the middle of the wick and stop there, “dying”. The reason why the wax won’t stay lit is because the wick is not hot enough, and it takes the wax a long time to melt.

There are many reasons why a candle won’t stay lit, and it’s usually some combination of the following:

Candle wick:

  • The wick is too short

The wick of a candle is the part that burns, and it’s the job of the wick to keep the flame burning. When your candle’s wick gets shorter, it doesn’t take as much wax to keep the candle burning. This is why most candles burn down to nothing.

  • The wick is too long

Not only is it nearly impossible to light with a long wick, it can also cause the candle to eventually blow out. This is the reason why some candles burn way too far down before they are done. And the only way to fix it is to shorten the wick.

  • The wick is too narrow

What many people don’t know is that the wick on a candle is actually the culprit. Candles with wicks that are too narrow are a lot more difficult to light than candles with wax that are too wide.

The problem is that the wick provides a small surface area that more wax can be absorbed into, which allows the wick to stay lit the entire time, especially in humid weather.

Candle wax:

  • The candle is too hot.

The main problem is wax; it can be very difficult to keep a candle alight, and once it gets too hot, it goes out.

It’s a known fact that candle wax can be damaged by high temperatures, and so you need to avoid burning your candle. However, you can find a candle that will perform well in a high temperature. environment.

  • The candle is too old.

That’s because it’s been sitting in its package since last Christmas. The wax has hardened, and although the wick is still intact, it won’t take fire from the wick.

That’s right, not only does candle wax become brittle over time, it also becomes too thick to generate enough heat to light the wick.

How to fix a candle that won’t stay lit

There are few things in life as exciting as the burning of a candle. The smell, the way it makes our homes smell, and the way our homes smell.

Unfortunately, most of us rarely look at the health of the candle and forget to take proper care of it. If you’ve ever ended up with a candle that is no longer burning properly, you know how frustrating it can be.

Sometimes, we need to keep the candle lit for a longer time. Here are some important tips to help you keep your candle lit for a longer time.

  •  The first burn is the most important – how to do it right

When you first light a candle, it’s nice to think about how nice it’ll be once it burns down, filling the room with its fragrant scent. However, there’s a lot to be said about the first burn.

The burning process is messy, it burns at a very fast pace and it creates a lot of heat. For these reasons, it’s best to light the candle for about 15 minutes before deciding to leave it to burn.

The good news is that, while the first burn isn’t the most important, it’s still a very important part of how the candle burns.

  • Trim your wick before every relight!

Trimming the wick (the outer part of the candle) is critical for the candle to burn as cleanly and efficiently as possible.

That’s because the wick collects soot and other impurities, which can increase the risk of your candle spontaneously combusting. If this happens, you’ll need to replace your candle or risk a house fire.

Leave a comment

Your email address will not be published. Required fields are marked *